文章摘要
胡云峰,庞权,阎瑞香,陈君然.布朗李果酒发酵工艺研究[J].包装工程,2019,40(9):43-47.
HU Yun-feng,PANG Quan,YAN Rui-xiang,CHEN Jun-ran.Fermentation Technology of Wine Made from Black Plum[J].Packaging Engineering,2019,40(9):43-47.
布朗李果酒发酵工艺研究
Fermentation Technology of Wine Made from Black Plum
投稿时间:2019-03-18  修订日期:2019-05-10
DOI:10.19554/j.cnki.1001-3563.2019.09.007
中文关键词: 布朗李  果酒  发酵工艺  酒精
英文关键词: black plum  wine  fermentation technology  alcohol
基金项目:西藏自治区科技重大专项(XZ201801NA04);天津市林果现代农业产业技术体系创新团队项目(ITTFPRS 2018010)
作者单位
胡云峰 天津科技大学 a.食品工程与生物技术学院天津 300222 
庞权 天津科技大学 a.食品工程与生物技术学院天津 300222 
阎瑞香 天津科技大学 b.包装与印刷工程学院天津 300222 
陈君然 天津科技大学 a.食品工程与生物技术学院天津 300222 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为了优化布朗李果酒的最佳发酵工艺。方法 以布朗李为原料,选取酵母接种量、发酵温度、初始含糖量、二氧化硫添加量为影响因子,以酒精度为考察指标,在单因素试验的基础上对布朗李果酒的发酵工艺进行正交优化。结果 得到了布朗李果酒发酵的最优工艺参数,酵母接种量(体积分数)为5%,发酵温度为26 ℃,初始含糖量(质量分数)为24%、二氧化硫添加量为80 mg/L。在此条件下发酵7 d的果酒酒精度(体积分数)为11.9%。结论 该工艺生产的布朗李果酒酒精度高,原料发酵充分,利用率高。
英文摘要:
      The paper aims to optimize the fermentation technology of wine made from black plum. With black plum as the raw material, additive amount of yeast, fermentation temperature, initial sugar content and the adding dosage of sulfur dioxide were selected as factors of influences to orthogonally optimize the fermentation technology of wine made from black plum with the alcoholic strength as a reference indicator. The results showed that the optimal fermentation conditions were as follows: additive amount of yeast was 5%, fermentation temperature was 26 ℃, initial sugar content was 24%, the adding dosage of sulfur dioxide was 80 mg/L. After 7 days of fermentation under the optimal conditions, the alcohol content of black plum wine was 11.9%. The black plum wine produced in this method has high alcoholic strength. The raw materials are fermented well and the usage rate is high.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22671285位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号