吉玉碧,徐国敏,胡 智,罗 恒,杨 照,田井速,谭 红.原料助剂对PVC密封垫蒸发残渣性能的影响研究[J].包装工程,2012,33(11):21-23,44.
JI Yu-bi,XU Guo-min,HU Zhi,LUO Heng,YANG Zhao,TIAN Jing-su,TAN Hong.Effect of Additives on Evaporation Residue of PVC Gasket[J].Packaging Engineering,2012,33(11):21-23,44. |
| 原料助剂对PVC密封垫蒸发残渣性能的影响研究 |
| Effect of Additives on Evaporation Residue of PVC Gasket |
| 投稿时间：2011-11-20 修订日期：2012-06-10 |
| DOI： |
| 中文关键词: PVC 助剂 蒸发残渣 密封垫 |
| 英文关键词:PVC additive evaporation residue gasket |
| 基金项目:财政部包装项目2010033;黔科合成字［2011］5011号 ISP［2010］06 |
| 作者 | 单位 |
| 吉玉碧 | 国家复合改性聚合物材料工程技术研究中心， 贵阳 550014 |
| 徐国敏 | 国家复合改性聚合物材料工程技术研究中心， 贵阳 550014 |
| 胡 智 | 国家复合改性聚合物材料工程技术研究中心， 贵阳 550014 |
| 罗 恒 | 国家复合改性聚合物材料工程技术研究中心， 贵阳 550014 |
| 杨 照 | 国家复合改性聚合物材料工程技术研究中心， 贵阳 550014 |
| 田井速 | 国家复合改性聚合物材料工程技术研究中心， 贵阳 550014 |
| 谭 红 | 国家复合改性聚合物材料工程技术研究中心， 贵阳 550014 |
|
| Author | Institution |
| JI Yu-bi | National Engineering Research Center for Compound Modified Polymer Materials, Guiyang 550014, China |
| XU Guo-min | National Engineering Research Center for Compound Modified Polymer Materials, Guiyang 550014, China |
| HU Zhi | National Engineering Research Center for Compound Modified Polymer Materials, Guiyang 550014, China |
| LUO Heng | National Engineering Research Center for Compound Modified Polymer Materials, Guiyang 550014, China |
| YANG Zhao | National Engineering Research Center for Compound Modified Polymer Materials, Guiyang 550014, China |
| TIAN Jing-su | National Engineering Research Center for Compound Modified Polymer Materials, Guiyang 550014, China |
| TAN Hong | National Engineering Research Center for Compound Modified Polymer Materials, Guiyang 550014, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 研究了PVC密封垫产品中常用原料助剂对蒸发残渣卫生性能指标的影响。结果表明，原料助剂的添加对接触水性和低乙醇食品的PVC密封垫产品的蒸发残渣影响较小；添加的CaCO-3填料对乙酸蒸发残渣影响明显， DINCH为增塑剂制备的PVC密封垫乙酸蒸发残渣值最低，ATBC为增塑剂制备的PVC密封垫正己烷蒸发残渣值最低。 |
| 英文摘要: |
| Effect of additives on PVC gasket evaporation residue amount was investigated. The results showed that, the use of additives has less effect on PVC gasket evaporation residue when contacting water-based and low-ethanol food; it has obvious impact on acetic acid evaporation residue when using additive CaCO-3. PVC gasket has the least acetic acid evaporation residue which using plasticizer DINCH, and the least hexane evaporation residue when using plasticizer ATBC. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501716号