文章摘要
潘文庚,尹海平,孔凡成,巢虎,张沿磊.高温高湿环境下弹药储运包装温湿度研究[J].包装工程,2016,37(23):125-128.
PAN Wen-geng,YIN Hai-ping,KONG Fan-cheng,CAO Hu,ZHANG Yan-lei.Temperature and Humidity for the Storage and Transportation Container of Ammunition in High-Temperature and High-Humidity Areas[J].Packaging Engineering,2016,37(23):125-128.
高温高湿环境下弹药储运包装温湿度研究
Temperature and Humidity for the Storage and Transportation Container of Ammunition in High-Temperature and High-Humidity Areas
投稿时间:2016-07-08  修订日期:2016-12-10
DOI:
中文关键词: 弹药  箱体包装  内部温度  高温  高湿
英文关键词: ammunition  container packaging  internal temperature  high temperature  high humidity
基金项目:
作者单位
潘文庚 空军勤务学院徐州 221000 
尹海平 空军勤务学院徐州 221000 
孔凡成 空军勤务学院徐州 221000 
巢虎 空军勤务学院徐州 221000 
张沿磊 空军勤务学院徐州 221000 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为确保弹药的储存质量与安全运输,对高温高湿环境下的弹药储运包装进行研究。方法 采用温湿度理论分析和数据拟合,从包装属性和环境湿度变化规律出发,研究弹药储运质量和使用可靠性与环境温湿度的关系。结果 南方高温高湿地区弹药集装需考虑各种外部环境影响,可得到其内部温度变化模型。通过计算可得箱体包装的内部温度达到70.77 ℃,可将某地的弹药包装箱体内部最高温度定为75 ℃。结论 弹药储运环境温湿度过高或过低是促使弹药质量变化的主要因素,环境温湿度过高或过低都会加速弹药各部件及材料老化。
英文摘要:
      The work aims to research the storage and transportation containers of ammunition in the high-temperature and high-humidity areas in order to ensure the storage quality and transportation safety of ammunition. The relationship between the storage quality and use reliability of ammunition and the temperature and humidity of environment was studied with temperature and humidity theoretical analysis and data fitting method, starting from packaging attributes and the change law of ambient temperature and humidity. Various kinds of external environmental influences should be considered for ammunition containers in southern areas with high temperature and high humidity, through which the internal temperature change model can be established. By means of calculation, the internal temperature of container packaging obtained could be up to 70.77 ℃. The maximum internal temperature of ammunition containers in some place could be set as 75 ℃. Excessively high or low ambient temperature and humidity for the storage and transportation of ammunition is the main factor that makes the ammunition quality change. Excessively high or low ambient temperature and humidity will accelerate the aging of all the components and materials of ammunition.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21794912位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号